Bearing 520894A is a universal type FAG four row cylindrical roller bearings, also known as mill bearing fit on roll neck for rolling mill. On the one hand it covers bearings with standardized dimensions (DIN 616), and on the other hand bearings which these FAG bearings were developed especially for rolling mills.

FAG 520894A cylindrical roller bearings technical data are shown in the following,

  
d: 160 mm
D: 230 mm
B: 130 mm
Mass: 17.6 kg
C:  830 KN  Basic dynamic load rating
C0: 1340 KN Basi...

Continue reading ...

Open type 32012-X is standard design FAG tapered roller bearings, with sheet steel cage, separable, adjusted or in pairs, which can be used at operating temperatures from -30 degree to +120 degree. And these type bearings can support axial loads in one direction and high radial loads, and widely used in automobiles and all industrial areas.

FAG bearings 32012-X main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs

           
d: 60 mm
D:95 mm
B: 23 mm
M: 0.612kg
Cr : Basic dy...

Continue reading ...

Higher accuracy thrust ball bearing 51184-MP P5 is a featured class P5 FAG axial thrust ball bearing, single direction, with solid brass window cage, ball-guided. Thrust ball only can support axial forces in one direction, therefore, these bearings only used in sustain axial forces in one direction and the low rotate speed lower machine parts, such as crane hook, water pump, centrifuge, jack and low speed reducer, etc.

In there, FAG bearings 51184-MP P5 product data are introduced as below,...

Continue reading ...

Ceramic ball bearing HCS71907-E-T-P4S is an adjustable universal paired FAG angular contact ball bearing, using ceramic ball as roller, with the contact Angle 25 degree. The ceramic ball bearings features: durable, high reliability, extend the service life of grease and prevent electric corrosion effect. And the spindle bearings are particularly suitable for bearing arrangements with very high requirements for guidance accuracy and high speeds. They have proved extremely suitable for main spi...
Continue reading ...

Go along with the rolling bearings play a very important role in the world oil refining, chemical, textile, machinery manufacturing, agricultural products processing industries, FAG deep groove ball bearings have been very successful in North America, such as Canada, Bahamas, Belize, America, Cuba and Mexico, etc. 


Here, let's recommend FAG bearings 6000-2RSR.C3 product data as below,
  
d: 10 mm
D: 26 mm
B: 8 mm
Mass: 0.02 kg
Cr: 480  N Basic dynamic load rating, radial
C0r: 1970  N Basic static l...
Continue reading ...

FAG 6002-2RSR.C3 single row deep groove ball bearing is one the most frequently used type of rolling bearing, with sheet steel cage, which have lip rubber seals on both sides made from nitrile butadiene rubber NBR and are suitable for moderate speeds. And these bearings have been very successful in the electric motor market.

For reference, FAG bearings 6002-2RSR product data are shown as below,

      
d: 15 mm
D: 32 mm
B: 9 mm
Mass: 0.033 kg
Cr: 5900  N Basic dynamic load rating, radial
C0r: 285...

Continue reading ...