Yakang Bearing Suppliers

Stand design 32008-XA is FAG tapered roller bearings 32000 series, open type, separable, adjusted or in pairs which comprise solid inner and outer rings with tapered raceways and tapered rollers in a window cage. Suffix X means its appearance and dimensions comply with international standards. And these FAG bearings can support axial loads in one direction and high radial loads, and widely used in automobiles and all industrial areas.

FAG 32008-XA Tapered roller bearings details in the foll...

FAG 7311-B-TVP single row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide cages, 73...B series, which with the 40 degree contact angle. And these single row angular contact ball bearings can support axial forces in one direction and high radial forces.

Following is FAG bearings 7311-B-TVP main technical data:

      
d: 55mm
D:120mm
B: 29mm
M: 1.38kg
Cr : Basic dynamic load rating, radial :86 KN  
C0r: Basic static...

FAG 20207-K-TVP-C3 Barrel roller bearings are single row self-aligning roller bearings, with tapered bore, which comprise solid outer rings with a concave raceway, solid inner rings with two ribs and a tapered bore as well as barrel rollers with cages. The FAG bearings cannot be dismantled and are also available with an adapter sleeve for locating purposes.

Detailed description of FAG bearings 20207-K-TVP-C3 are shown as below:

  
d: 35mm
D: 72mm
B: 17mm
M: 0.296 kg
Cr : Basic dynamic load rating,...

For electric power, machine tool, mine, chemical industry, FAG double row angular contact ball bearings are frequently additional requirements for the high temperature resistance and low maintenance. FAG 3214-B-2RSR-TVH, double row, lip seals on both sides, contact angle 25 degree, which has higher cost-effectiveness, higher operational security and have excellent product quality that far exceeds previous standards.

Following is FAG bearings 3214-B-2RSR-TVH main technical data:

     
d: 70mm...

FAG 51122 is a stand Axial deep groove ball bearings 511 series, single direction, with solid brass cage, which comprise shaft locating washers, housing locating washers and ball and cage assemblies. And these FAG bearings are not self-retaining can be fitted separately, and can support axial forces in one direction.

Following is the product data of FAG axial deep groove ball bearings 51122,
   
d: 110mm
D: 145mm
B: 25mm
M: 1.45kg
Ca : Basic dynamic load rating, axial : 86.5 KN  
C0a: Basic static...

FAG 2211-TVH Self-aligning ball bearings are open design double row, which self-retaining units comprising outer rings with a concave raceway, inner rings with a cylindrical bore and ball and glass fiber reinforced polyamide cage assemblies. Sealed design 2211-2RS-TVH, large clearance bearing 2211-TVH-C3, with tapered bore bearing 2310-K-TVH are also available.

Detailed description of FAG bearings 2211-TVH are shown as below:
   
d: 55mm
D: 100mm
B: 25mm
M: 0.73 kg
Cr : Basic dynamic load rating, ...

Bearing BCH06604-P belongs to drawn cup needle roller bearings BCH..P heavy series with closed end, and with lip seal on one side, inch sizes, and they are separable and consist of two bearing rings and a great amount of needle rollers which are retained and guided by a cage. And these FAG bearings can be used in springs industries, special ship, diving equipment, food processing, miscellaneous instruments, transistor parts, medical equipment, etc.

In there, let's pay more attention to FAG ...

FAG 29368-E-MB Axial Spherical roller bearings also are single row, self-aligning roller bearings, which comprise solid shaft and housing locating washers and asymmetrical barrel rollers with cages. The bearings with the suffix MB have a solid brass cage that is guided on the shaft locating washer. And these FAG bearings can support very high axial loads and allow relatively high speeds.

For convenience, the FAG 29368-E-MB technical data is shown below:

   
d: 340mm
D:540mm
B: 122mm
M: 98.9kg
Ca...

FAG 234420-M-SP is a representative FAG thrust angular contact ball bearings, double direction, 2344 series, open design, which are precision bearings without self-retention and with restricted tolerances to class SP and comprise solid shaft locating washers, a spacer ring, a housing locating washer and ball and cage assemblies with solid brass cages. Therefore these FAG bearings particularly suitable for precision spindle bearing arrangements in machine tools.

Following is the product data ...