Screw drive bearing ZKLF50115-2RS is double direction INA axial angular contact ball bearings for screw mounting, with plastic cage, lip seals on both sides, which this type of bearing are mostly used in food processing machinery, mineral machinery, petroleum machinery, textile industry and other industry equipments.

INA bearings ZKLF1762-2RS-PE, double direction, for screw mounting, lip seals on both sides, 

 
d: 50 mm
D: 115 mm
B: 34 mm
M: 1.86kg
Ca   46.5 KN  Basic dynamic load rating, ...

Continue reading ...

INA Stud type track rollers KR30-PP is ordinary type INA needle roller bearings, with plastic axial guidance, plastic axial plain washers on both sides, which has three-stage seal. Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running; And these bearings are popular used in cam gears, bed ways and conveying equipment.

INA bearings KP30-PP tech...

Continue reading ...

INA NKI85/26 needle roller bearing with ribs usually referred to as X-life bearings for generally use, light series, which comprising machined outer rings with ribs, needle roller and cage assemblies and removable inner rings. These bearings have optimised raceway surfaces, as a result this give   higher load carrying capacity and longer rating life.

For reference, INA bearings NKI85/26 more details can be shown as below,

    
d = 85
D =115
T = 26
Mass =0.743
Basic Dynamic Load Rating, Cr: 83
Basi...

Continue reading ...

INA Pillow block bearing RASE 70 is widespread Plummer block housing units, cast iron housing, radial insert ball bearing with eccentric locking collar, R seals, the units material used for the cast iron housings is cast iron EN-GJL-200/250 to DIN EN 1561, which are ready-to-fit and comprise cast iron in which radial insert ball bearings are fitted..

More details can be learned from INA bearings RASE 70 technical data below:

  
d:      70 mm
L:      260 mm
H2:     156 mm
A :    65  mm
A1:     44 ...

Continue reading ...

INA Axial angular contact ball bearings ZKLF1762-2RS-PE is screw mounted directly on the adjacent construction or in a radial locating bore, with plastic cage and PE design is less stringent bearing design, which these bearings features high accuracy, high load carrying capacity, high rigidity, low friction, are easy to fit and maintenance-free or low-maintenance increased tolerances.

INA bearings ZKLF1762-2RS-PE, double direction, for screw mounting, lip seals on both sides,

      
d: 17 mm...

Continue reading ...

INA 81218-TV is one ordinary 812 series of thrust cylindrical roller bearings, single row, which comprising axial cylindrical roller and cage assembly K81218-TV, housing locating washer GS81218 and shaft locating washer WS81218. The INA bearings have very low axial section height, high load capacity, high rigidity and can support axial forces in one direction.


INA thrust cylindrical roller bearings 81218-TV product data as below, 

  
d: 90mm
D:135mm
B: 35mm
M:1.77kg
Ca : Basic dynamic load rating,...
Continue reading ...

INA ZSL192317C3 Cylindrical roller bearings with spacers (series ZSL) are semi-locating bearings, which is a single row, self-retaining design and correspond to dimension series 23. And these INA bearings can support not only high radial forces but also axial forces in one direction and can therefore guide shafts axially in one direction.


Description of INA cylindrical roller bearing ZSL192317C3 in the following:

  
d:85mm
D:180mm
B: 60mm
M: 7.23kg
Cr : Basic dynamic load rating, radial : 540 KN  
C...

Continue reading ...