INA Yoke type track roller bearing PWTR3072-2RS is supplied as an X-life design of INA needle roller bearings, full complement cylindrical roller set, with axial guidance, lip seals on both sides, which are available with an inner ring and in both sealed and open versions. Yoke type track rollers can support high radial loads as well as axial loads arising from slight misalignment and skewed running.

Following is the characteristics of INA bearings PWTR3072-2RS, for your reference, 
  
d: 30m...

INA SL045014-PP, making by Germany plant, belongs to cylindrical roller bearings, full complement, double row, sealed on both sides, which consist of machined outer and inner rings, rib guided cylindrical rollers and sealing rings. Cable sheave bearings are normally subjected to circumferential load on the outer ring. And these bearings can support axial forces from both directions as well as radial forces.

INA SL045014-PP Cylindrical roller bearings product data as below:

       
d: 70mm
D: 1...

INA ZKLN1242-2Z, Making by INA Germany Factory, belongs to axial angular contact ball bearings ZKLN...-2Z series are mounted­ in a housing bore, the bearing outer ring is axially located by a cover. Bearings with the suffix 2Z are sealed using gap seals and are suitable for higher speeds. Due to the contact angle of 60 degree, the bearings can support not only radial forces but high axial forces as well.

INA ball bearings ZKLN1242-2Z, double direction, gap seals on both sides
  
d: 12 mm
D: 42...