Yakang Bearing Suppliers

Ball screw ball bearing 5TAC 62BSUC10PN7B also called NSK angular contact thrust ball bearing for screw drives, single direction, super-precision, highly rigid series, which have large axial rigidity and precise rotation with lower starting torque, and these ball screw support angular contact thrust ball bearings for machine tool and injection molding machine.

For details, please see the NSK bearings 25TAC 62BSUC10PN7B product data as below,

   
d = 25mm
D = 52mm
M = 15mm
Mass = 0.15kg
Limitin...

NSK 6205DDU deep groove ball bearings is the most common type of single row rolling bearings with rubber seals on both sides, the ball bearing features low torque applications where high speeds and low power loss, so these NSK bearings are widely used in automobile, tractors, machine tools motors, pumps, agricultural machinery, textile machinery, etc.

Following is NSK 6205DDU deep groove ball bearings main technical data:

   
d: 25mm
D: 52mm
B: 15mm
M: 0.13kg
Basic dynamic load rating: 14.8KN...

NSK 22211EAKE4 is a stand spherical roller bearing, and also know as self-aligning roller bearings, which with tapered bore, with machined brass cage, oil groove and oil holes. And these roller bearings most used in papermaking machinery felt roller and canvas belt roller, it is the best choice for the masses of customers for its excellent design structure and high quality condition.

More detailed information we can learn form NSK bearings 22211EAKE4 in the following:

   
d: 100mm
D: 180mm
B: 4...

2209-DDU is an ordinary NSK sealed self-aligning ball bearings, with contact seals on both sides, which have two rows of balls and a common concave spheroid raceway in the outer ring. And these NSK bearings are usually used in civil engineering machinery, textile machinery transmission shaft, etc.


More data information of nsk self-aligning ball bearings 2209-DDU as below: 

 
d: 45mm
D: 85mm
B: 23mm
M: 0.522kg
Basic dynamic load rating,  Cr:   23.3KN  
Basic static load rating ,    Cor:  8.15KN  
Li...

51213 is a single direction thrust ball bearing used widely of the NSK bearings, with flat seat and pressed steel cage, which features high quality steel, advanced grease technology and high grade balls. And these NSK bearings can sustain axial loads in one direction and thus locate a shaft axially in one direction and they must not be subjected to any radial load.


In there, let's pay more attention to NSK bearings 51213 technical data in following:

    
d: 65mm
D: 100mm
B: 27mm
M: 0.756kg
Basi...

Rolling bearing 220KVE2902 is a stand NSK sealed-clean four-row tapered roller bearings for steel mill, KVE series, which has two double-cone assemblies, two cups, one double cup and three spaces. Roll neck bearings for rolling mills are limited in size by the roll neck diameter and minimum diameter. So these NSK bearings are mainly used on the roll necks of hot or cold rolling mills used for forming blooms, plates and other stock.

We can get to know the details of 220KVE2902 from its techni...

NSK 7306AW know as Angular contact ball bearings, single row, as we knows suffix code A refers to 30 degree contact angle and W indicate stamping cage. Thanks to their 30 degree contact angle, they can accommodate higher axial loads helping generate longer life, minimize downtime and reduce maintenance costs. So these NSK bearings can sustain significant axial loads in one direction together with radial loads.


For convenience, the NSK angular contact ball bearing 7306AW technical data is shown...

NSK 23222CKE4 is a basic C design spherical roller bearings, tapered bore, with machined brass cage, oil groove and oil holes. And we can get information form the bearings: C means standard contact angle of 15 degree. E4 means lubricating groove in outside surface and holes in outer ring. K means tapered bore of 1:12. And the bearings have a very high load carrying capacity in the radial and axial directions, so these NSK bearings are widely used in heavy industry.

More details can be learne...

NSK 200KBE52+L belong to Tapered roller bearings KBE series, double row. KBE (TDO) double row export-oriented bearings are comprised to integral outer ring and double separate the inner ring, which with large contact angle, and can also support axial load ability, so these NSK bearings mainly used in the heavy machinery, such as oil rig hoisting equipment, rolling mills and machines used in the mining industry.

Product data of NSK tapered roller bearings 200KBE52+L as below:

  
d: 200mm
D: 360...