Yakang Bearing Suppliers

NTN 32934XU common metric series tapered roller bearings are made from case-hardened alloy steel to provide superior fatigue life and reliability. The suffix X means different bore, outer diameter, width or radius from basic part number, and U means ISO series, internationally interchangeable through hardened steel. And these bearings are constructed to have a high capacity for radial loads, axial loads, and combined loads.

Learn more information from NTN bearings 32934XU product data in the...

Bearing 6203 LLB---NTN deep groove ball bearings non-contact sealed type LLB, with pressed cage, which construction is the outer ring incorporates synthetic rubber molded to a steel plate and seal edge is aligned with V-groove along inner ring surface with labyrinth clearance. And these NTN bearings can sustain radial and axial loads in either direction as well as well as the complex loads which result from the combination of these forces.

For convenience, NTN deep groove ball bearings 6203 ...

NJ217EV12---is a stand single row NTN Cylindrical roller bearings, NJ type, with molded resign cage, which has double ribs on outer ring, single rib on inner ring, and can accommodate heavy radial loads in single direction. Furthermore, these NTN bearings are separable, and relatively easy to install and disassemble even when interference fits are required.

NTN NJ217EV12 cylindrical roller bearings product data in the following: 

 
d: 85mm
D: 150mm
B: 28mm
M: 2.11kg
Basic dynamic load rating:...

NTN 7915CDB/GNP4 is free paired P4 grade angular contact ball bearings, with molded resign cage and have a 15"contact angular, compound mode back-to-back DB type, which has a large distance between the acting load center of the bearing, therefore these NTN bearings have a large momentary force load capacity, and can accommodate radial loads and axial loads in either direction.

NTN 7910 CDB/GNP4Angular contact ball bearings product data as below,
   
d = 50mm
D = 72mm
M = 12mm
Mass = 0.157kg
Ba...

2209-DDU is ordinary large size NTN spherical roller bearings 223 series, with machined cage, and cylindrical bore. This bearing has self-aligning properties, and therefore is suited for use where misalignment between the inner and outer rings occurs from housing installation error or shaft flexure. So these NTN bearings have a large capacity for radial loads, axial loads in either direction, and complex loads.

NTN spherical roller thrust bearings 22332BD1/C4 details as bellow: 
   
d: 160mm
D:...

52308 is the most common sizes SKF Thrust ball bearings, double row, which can accommodate axial loads acting in both directions and can thus serve to axially locate a shaft in both directions. And these SKF bearings are widely used in motor, industrial machinery, CNC lathes, high-precision processing machine, locomotive industry, etc.

More details we can learn from SKF Thrust ball bearings 52308 as below:

  
d: 30mm
D: 78mm
B: 49mm
M: 1.05 kg
C : Basic dynamic load rating,  61.8 KN  
C0: Basic ...

Bearing 51140 is a stand NTN thrust ball bearings, single direction, with pressed cage, which consist of three parts: shaft washer, housing washer and rolling element. And they can sustain axial loads but no radial loads, so the thrust ball bearings are often used as a vertical shaft bearing.

In there, let's pay more attention to NTN bearings 51140 technical data in following:

     
d: 200mm
D: 250mm
B: 37mm
M: 102kg
Basic Dynamic Load Rating Ca: 172 KN
Basic Static Load Rating Coa: 675 KN
Limiti...

Our bearing 2202LLB is a stand NTN sealed self-aligning ball bearings, double row, with seals, which are constructed with the inner ring and ball assembly contained within an outer ring that has a spherical raceway. So these NTN bearings are apply to bear heavy loads and impact load,  paper, motorcycles, metallurgy, mill, mining, petroleum, cement, sugar, and other general machinery industries.

More details can be learned from NTN 2202LLB technical data below: 

      
d: 15mm
D: 35mm
B: 14m...

NTN 22206CD1 is a small sized spherical roller bearings C type, 222 series, with cylindrical bore, which consist of an outer ring having a continuous spherical raceway within which operates two rows of barrel-shaped rollers. So these NTN bearings have a large capacity for redial loads, axial loads in either direction, and complex loads.

More details can be learned from NTN 22206CD1 technical data below:

    

d: 30mm
D: 62mm
B: 20mm
M: 0.287kg
Basic dynamic load rating,  Cr:    49KN  
Basic stati...