Our SKF 33030 is a typical type of SKF tapered roller bearing, single row, which is made in SKF German factory and are applications where the load carrying capacity is so much heavier that only one single tapered roller bearing is inadequate. These SKF bearings usually used in industrial drive, agriculture, compressors, motors and generators, construction, industrial fan, industrial transmission and other fields.

SKF 33030 Tapered roller bearings details in the following: 

 
d: 150 mm
D: 225 ...

SKF ball bearings 1322KM belongs to self-aligning ball bearings, with tapered bore, unsealed, which this bearing has two rows of balls and a common concave sphere raceway in the outer ring. And these bearings are particularly suitable for applications where considerable shaft deflections or misalignment are to be expected.

Description of SKF bearings 1322KM in the following:

    
d: 110mm
D: 240mm
B: 50mm
M: 11.5 kg
Basic dynamic load rating, C:   163 KN     
Basic static load rating,   C0:  72...

Our part no NNF 5024 ADA-2LSV----is a cylindrical roller bearing, also called locating bearing, double row full complement seal on both sides, flanges for double direction axial load, NNF design, which bearings in the NNF 50 and 3194(00) series are always sealed on both sides and filled with grease. And these SKF bearings can be used to locate a shaft axially in both directions.

We can get to know the details of SKF NNF 5024 ADA-2LSV from its technical data as follows:

   
d: 120mm
D: 180mm
B: ...

SKF 23192 CAK/W33---Spherical roller bearings, with a tapered bore, unsealed, and with one-piece machined brass cage of the double-pronged type, retaining flanges on the inner ring and guide ring centered on the inner ring. K means tapered bore, C3 indicates larger clearance than normal, and W33 is with groove and 3 oil holes in outer ring.

Description of SKF bearings 23192 CAK/W33 in the following: 

 
d: 460 mm
D:760 mm
B: 240 mm
M: 425 kg
Basic dynamic load rating,  C:    6400KN  
Basic stat...

Bearing NCF 28/560 V---SKF Cylindrical roller bearings, single row full complement, NCF design, which have two integral flanges on the inner ring and one integral flange on the outer ring and can thus support axial loads acting in one direction and provide axial shaft location in one direction. And these SKF bearings incorporate a maximum number of rollers and are therefore suitable for very heavy radial loads.

We can get to know the details of SKF 28/560 V from its technical data as follow...

Bearing 16060MA is a larger series SKF deep groove ball bearings, single row, with machined brass cage, without seal, which made in SKF France factory. Single row deep groove ball bearings are particularly versatile, so these SKF bearings are simple in design, non-separable, suitable for high and even very high speeds and are robust in operation, requiring little maintenance.

More details can be learned from deep groove ball bearings 16060MA technical data below: 

   
d: 300 mm
D: 460 mm
B: 50...

Bearing 81104 TN knows as SKF Cylindrical roller thrust bearings 811 series, single direction, with injection moulded cage of polyamide 66, which are thrust bearings containing cylindrical rollers. So these SKF bearings are able to support heavy axial loads and relatively insensitive shock loads

SKF cylindrical roller thrust bearings 81104 TN details as bellow: 
 
   
d: 20 mm
D:35 mm
B:10 mm
M: 0.037 kg
Basic dynamic load rating,  C:    18.6 KN  
Basic static load rating,     Co:    48 KN  
Refe...

Part no 29422E us a stand SKF spherical roller thrust bearings, with a pressed steel window-type cage which with the rollers, forms a non-separable assembly with the shaft washer, which they can support very heavy axial loads and permit relatively high speed operation. Therefore these SKF bearings suitable for applications for Power Generation, Wind Turbines, heavy industry, Transmissions, Agricultural, pumps, mining, and so on.

More details can be learned from SKF 29422E technical data bel...

SKF 23152 CCK/W33----Spherical roller bearing, with taper bore, unsealed. Made in Great Britain. And these SKF bearings are mainly used in the paper-making machinery, deceleration devices, railway rolling stock axles, rolling mill gear box seats, crushing machines, vibrating screen, printing machinery and woodworking machinery, etc.

Description of SKF Explorer Spherical roller bearing 23152CCK/W33,  

            
d: 260 mm
D:440 mm
B: 144 mm
M: 87.5 kg
Basic dynamic load rating,  C:    2550KN  
B...

2204 E-2RS1TN9 is an ordinary SKF sealed self-aligning ball bearings, with cylindrical bore, seal on both sides. These sheets steel reinforced seals are made of oil and wear-resistant acrylonitrile-butadiene rubber (NBR). And the SKF bearings cage material is glass fiber reinforced polyamide 66.  

More data information of SKF self-aligning ball bearings 2204 E-2RS1TN9 as below: 

 
d: 20mm
D:47mm
B: 18mm
M: 0.14kg
Basic dynamic load rating,  C:   12.7KN  
Basic static load rating ,    Co:   3.4KN ...

SKF T4EE 160/VB406 is a standard design single row metric Tapered roller bearings for general use. Which are mounted with preload, have special friction characteristics, higher running accuracy and higher axial load carrying capacity to provide a constant, accurate mesh. So these SKF bearings are suitable for bearing arrangements supporting heavy axial loads, like gearbox pinion bearing arrangements.

SKF T4EE 160/VB406 Tapered roller bearings details in the following: 
   

d: 100 mm
D: 245...