Argentina bearing 3310A-2Z/MT33, is a SKF Angular contact ball bearing, made in Argentina SKF Factory, double row, with shield on both side, which can support higher double direction axial load and radial load. SKF bearings 3310A-2Z/MT33 is a multi-purpose bearing, with shield on both sides can effectively prevent the leakage of grease and most dust, therefore this type bearing requirements use in the much higher position.

Product data of SKF Angular contact ball bearing 3310 A-2Z/MT33 are ...

Our part no NNF 5020 ADB-2LSV----is a cylindrical roller bearing, also called locating bearing, double row full complement seal on both sides, flanges for double direction axial load, NNF design, which bearings in the NNF 50 and 3194(00) series are always sealed on both sides and filled with grease. And these bearings can be used to locate a shaft axially in both directions.

We can get to know the details of SKF NNF 5020 ADB-2LSV from its technical data as follows:
  
d: 100mm
D: 150mm
B: 67mm
M...

SKF rolling bearing 1220 K + H 220 belongs to  self-aligning ball bearing, open type, tapered bore, with pressed steel cage. H220 is an adapter sleeve. Which this bearing has two rows of balls and a common concave sphered raceway in the outer ring. And it’s particularly suitable for applications where considerable shaft deflections or misalignment are to be expected.


Following is the product data of  SKF self-aligning ball bearing 1220 K + H 220:

    

d: 90mm
D: 180mm
B: 34mm
M: 3.6 kg
M1: 1.5 ...

SKF 16056MA is larger series SKF deep groove ball bearing, single row, with machined brass cage, without seal. We can also supply lighter series deep groove ball bearings with rubber seals and steel seals on both sides like 61826-2RS1, 61826-2RZ etc.

Detailed description of SKF deep groove ball bearings 16056MA are shown as below:
 
       
d: 280mm
D: 420mm
B: 44mm
M: 23.5 kg
Basic dynamic load rating, radial, C:   242 KN     
Basic static load rating, radial,  C0:  335 KN     
Limiting speed :...

Our SKF 31324 J2/DF is a typical type of SKF face to face paired  tapered roller bearing, single row, which is made in SKF German factory and are applications where the load carrying capacity is so much heavier that only one single tapered roller bearing is inadequate. Usually used in Transmission, gearboxes, wheel hubs, cranes, elevator and lifting equipments etc.

SKF paired single row tapered roller bearing 31324 XJ2/DF 

 

d: 120mm
D: 260mm
B: 136 mm
M: 38.5kg
C:  935KN   Basic dynami...

FAG 54322-MP is a representative FAG Axial deep groove ball bearing, also called Thrust ball bearing, double direction, 543 series, with spherical housing locating washers and solid brass window cages , U322 is a sphered seat washer. Axial deep groove ball bearings comprise shaft locating washers, housing locating washers and ball and cage assemblies. Double direction axial deep groove ball bearings can support axial forces in both directions.

Following is the product data of FAG Axial deep ...