Yakang Bearing Suppliers

Our part no NNF 5020 ADB-2LSV----is a cylindrical roller bearing, also called locating bearing, double row full complement seal on both sides, flanges for double direction axial load, NNF design, which bearings in the NNF 50 and 3194(00) series are always sealed on both sides and filled with grease. And these bearings can be used to locate a shaft axially in both directions.

We can get to know the details of SKF NNF 5020 ADB-2LSV from its technical data as follows:
  
d: 100mm
D: 150mm
B: 67mm
M...

SKF rolling bearing 1220 K + H 220 belongs to  self-aligning ball bearing, open type, tapered bore, with pressed steel cage. H220 is an adapter sleeve. Which this bearing has two rows of balls and a common concave sphered raceway in the outer ring. And it’s particularly suitable for applications where considerable shaft deflections or misalignment are to be expected.


Following is the product data of  SKF self-aligning ball bearing 1220 K + H 220:

    

d: 90mm
D: 180mm
B: 34mm
M: 3.6 kg
M1: 1.5 ...

SKF 16056MA is larger series SKF deep groove ball bearing, single row, with machined brass cage, without seal. We can also supply lighter series deep groove ball bearings with rubber seals and steel seals on both sides like 61826-2RS1, 61826-2RZ etc.

Detailed description of SKF deep groove ball bearings 16056MA are shown as below:
 
       
d: 280mm
D: 420mm
B: 44mm
M: 23.5 kg
Basic dynamic load rating, radial, C:   242 KN     
Basic static load rating, radial,  C0:  335 KN     
Limiting speed :...

Our SKF 31324 J2/DF is a typical type of SKF face to face paired  tapered roller bearing, single row, which is made in SKF German factory and are applications where the load carrying capacity is so much heavier that only one single tapered roller bearing is inadequate. Usually used in Transmission, gearboxes, wheel hubs, cranes, elevator and lifting equipments etc.

SKF paired single row tapered roller bearing 31324 XJ2/DF 

 

d: 120mm
D: 260mm
B: 136 mm
M: 38.5kg
C:  935KN   Basic dynami...

FAG 54322-MP is a representative FAG Axial deep groove ball bearing, also called Thrust ball bearing, double direction, 543 series, with spherical housing locating washers and solid brass window cages , U322 is a sphered seat washer. Axial deep groove ball bearings comprise shaft locating washers, housing locating washers and ball and cage assemblies. Double direction axial deep groove ball bearings can support axial forces in both directions.

Following is the product data of FAG Axial deep ...

As we know, SKF double direction angular contact thrust ball bearings were developed by SKF Corporation to axially locate spindles in both directions. These bearings are intended for mounting in combination with cylindrical roller bearings in the NN 30 K or N 10 K series in the same housing bore. And these bearings combination simplifies machining of the housing bore.

SKF Angular contact thrust ball bearing BTW 200 CW/SP, double direction, super-precision, BTW design,

d: 200mm
D: ...

SKF 53412M is a representative SKF Thrust ball bearing, single direction, sphered housing washer , U412 is a sphered seat washer, it is to compensate for misalignment between the support surface in the housing and the shaft. Thrust ball bearings usually consist of a shaft washer, a housing washer and a ball and a cage thrust assembly. And these bearings can accommodate axial loads in one direction and thus locate a shaft axially in one direction.

Production data of SKFThrust ball bearing 534...

SKF Explorer 22215E----Spherical roller bearing, with cylindrical bore, unsealed. Made in Great Britain. Spherical roller bearings are mainly used in the paper-making machinery, deceleration devices, railway rolling stock axles, rolling mill gear box seats, crushing machines, vibrating screen, printing machinery and woodworking machinery, etc.

Description of SKF Explorer Spherical roller bearing 22215 E

                

d: 75mm
D: 130mm
B: 31mm
M: 1.7kg
Basic dynamic load rating,  C:    212KN...

SKF GE 100 ES----- SKF  Radial spherical plain bearing requiring maintenance, steel -on-steel, unsealed, GE..ES series, which have an inner ring with a sphered convex outside diameter and an outer ring with a correspondingly sphered but concave inside surface. SKF radial spherical plain bearings requiring maintenance have the sliding contact surface combination steel-on-steel. Bearings with this sliding contact surface combination require regular relubrication.

Product data of SKF Radial sph...